基于Matlab计算滚动轴承滚滑接触内部应力分布

滚动轴承服役过程中,因滚滑现象和残余应力的存在,使赫兹接触应力不能反映材料真实的受力状态,应力分布与实验现象存在一定的偏差,因此滚滑接触下材料的内部应力计算显得尤为重要。研究一种快速、简单的材料滚滑接触内部应力的计算方法,以替代耗时长的有限元法。以现有公式为基础,通过Matlab编程计算滚滑接触下材料内部的应力场;对比不同摩擦因数下2D、3D滚滑接触内部应力场的差别。结果表明:摩擦因数越大,最大剪切应力越大,位置越接近表面,与滚动方向的夹角越小;切向摩擦力使接触点两侧最大正交切应力大小及位置发生变化;随着摩擦因数增大,一侧应力值上升,位置靠近表面,另一侧反之。提出的计算方法简单、方便,其结果为解析解,便于与残余应力或其他应力结合求出真实应力场。通过实例分析发现,真实应力场能够更好地解释实验现象,对于轴承材料组织演变的研究有重要意义。     

Effect of load reduction mechanisms on loads and blade bearing movements of wind turbines

The power control of wind turbines is usually realized via a change in the pitch angle of the rotor blades. Pitching facilitates the exact control of the turbines and the reliable deceleration of the rotor when required. Pitch movements can moreover be used for load control. One of these methods is called individual pitch control (IPC). IPC controls the blades individually and brings about a significant reduction in the fatigue loads and extreme loads placed on the structural components, while at the same time reducing the yield of the turbine only slightly. The lower loads reduce material costs, and thus, the cost of energy (CoE) is reduced, despite the slight reduction in yield. The method is nevertheless not used everywhere since the additional movement cycles put the rotor blade bearings in particular under stress. Special attention must be paid to small amplitude oscillating movements, which carry a high risk of inducing surface damage in the rolling contacts of the blade bearings. This paper uses a cycle analysis of the IWT7.5‐164 reference turbine to illustrate the differences in the movement patterns of wind turbine blade bearings with and without IPC. Moreover, model calculations with single contacts are used to show which of the movement patterns carries a risk of inducing surface damage. The use of IPC leads to the expected load reduction at the blade root. In current literature, IPC is usually assumed to have a negative influence on the life expectancy of blade bearings, but the findings of this study contradict this. The summed blade bearing movement is increased, although the number of very small pitch angles occurring is reduced. This reduction reduces the risk of wear in the blade bearings.     

Chitosan-based fiber-sponge materials as a promising tool for microalgae harvesting from Lake Baikal

Mass eutrophication of microalgae and cyanobacteria is observed in Lake Baikal in the past decade. In this paper, the concept of replaceable adsorption filter material based on chitosan flocculant filler and chlorinated polyvinyl chloride polymer nonwoven material are proposed. Functional and mechanical properties and morphology of the material are investigated depending on a packing density and a degree of chitosan filling. The introduction of 45% chitosan increases the Young's modulus up to 10 times, and it makes the material more rigid in 2.8 times. The high efficiency of sorption and growth inhibition of cumulative biomass culture was shown. The biomass source is taken from the coast of Barguzinsky Bay of Lake Baikal. Dominant species is microalgae of Scenedesmus genus.     

基于康复训练中力信号的人体参与度建模

设计一种基于人机接触力的人体主动参与程度评估模型,用于康复机器人应用中的主动康复训练。通过人体的肌电信号得到肌肉活跃度,确定肌电信号与人体参与度的关系。分析这一过程中人机接触力的变化,将腿部力信号平均值以及腰部力信号方差作为模型输入,对基于肌电信号的参与度模型进行拟合,得到基于力信号的参与度模型,使用肌电信号参与度模型对力信号参与度模型进行验证,证明了该模型的有效性。该方法避免了肌电信号采集时干扰较大且准备工作繁琐等缺点,具有良好的实用性。     

高湿黏性颗粒在聚四氟乙烯微孔膜滤料表面沉积特性的数值模拟

基于聚四氟乙烯(PTFE)微孔膜滤料扫描电镜(SEM)图像，建立PTFE微孔膜滤料微观结构模型，采用计算流体力学和离散单元法(CFD?DEM)耦合的方法对黏性颗粒在微孔膜滤料表面沉积特性进行模拟，引入液桥力模型，忽略范德华力的作用，统计计算域内颗粒的受力情况，分析了不同表面能条件下3~6 ?m粒径颗粒在微孔膜滤料表面的沉积特性，将模拟结果与黏附效率的经验公式进行对比。结果表明，黏附效率与经验值、颗粒受力与液桥力模型的相对误差均在6%以内，CFD?DEM耦合计算方法可用于模拟不同环境湿度条件下的颗粒沉积；过滤风速、粒径与黏性是影响沉积形态的重要因素，提高过滤风速及增大颗粒粒径与黏性，颗粒更易在滤料表面形成稳定的树突结构，黏附效率及含尘压降增加。环境相对湿度影响两物体间液桥体积，接触力影响颗粒沉积，当增加表面能与液桥体积时，接触力及液桥力均相应增加，根据受力平衡原理，环境相对湿度对颗粒沉积影响很大。     

橡塑往复密封性能参数数值求解流程与物理模型探讨

橡塑往复密封的密封寿命通常是通过膜厚、承载力、泄漏率、磨损率等参数以表征。为获取上述参数,佐治亚大学SALANT提出橡塑往复密封模型建立和数值计算求解流程。为更好地理解与应用该方法,从橡塑往复密封物理结构、数值求解流程、Reynolds方程建立、方程约束边界建立、GW接触模型建立、力载平衡等6个方面系统地分析其特点与不完备之处,并从6个方面探讨数值求解流程和数值模拟的修正方法;提出密封模型修正方法,给出修正后密封数值求解流程,使得计算结果更好地与实际工作性能相吻合,并能较好地揭示密封机制。     

Understanding the Self-Assembly of Cellulose Nanocrystals—Toward Chiral Photonic Materials

Over millions of years, animals and plants have evolved complex molecules and structures that endow them with vibrant colors. Among the sources of natural coloration, structural color is prominent in insects, bird feathers, snake skin, plants, and other organisms, where the color arises from the interaction of light with nanoscale features rather than absorption from a pigment. Cellulose nanocrystals (CNCs) are a biorenewable resource that spontaneously organize into chiral nematic liquid crystals having a hierarchical structure that resembles the Bouligand structure of arthropod shells. The periodic, chiral nematic organization of CNC films leads them to diffract light, making them appear iridescent. Over the past two decades, there have been many advances to develop the photonic properties of CNCs for applications ranging from cosmetics to sensors. Here, the origin of color in CNCs, the control of photonic properties of CNC films, the development of new composite materials of CNCs that can yield flexible photonic structures, and the future challenges in this field are discussed. In particular, recent efforts to make flexible photonic materials using CNCs are highlighted.     

无扩口导管拧紧力矩对其密封性能的影响

以某型飞机中无扩口液压导管为研究对象,结合飞机液压导管实际安装以及保压工况,利用有限元软件ANSYS中多线性随动强化来模拟导管弹塑性本构模型;对处于不同安装力矩以及恒定压力下的导管连接件进行仿真分析,研究安装力矩对导管管接头处的应力应变以及密封性能的影响,并给出参考安装力矩。构建液压导管安装试验台,利用力矩扳手采集拧紧力矩值并使用液压油车对导管进行加压试验,验证不同安装力矩对导管管接头密封性能的影响。结果表明:导管与卡套之间的胀形区域产生的大变形以及应力集中是引起导管管接头渗漏的主要原因之一;所提出的密封性能仿真方法可以较为准确地模拟拧紧力矩与密封性能的关系,为实际工程中导管安装提供依据。     

闸片材料参数与制动盘温度关系

闸片材料参数不仅关系到摩擦副的摩擦磨损性能,也是影响制动盘温度分布的一个重要因素。采用ADINA软件,建立列车制动盘和闸片的三维热机耦合有限元模型,在制动速度100 km/h、压力0.538 MPa和惯量23 kg·m2条件下,研究闸片材料热膨胀系数、弹性模量、热传导系数对制动盘温度和接触压力的影响。结果表明:当闸片热膨胀系数从0.5×10-5 K-1增大到2.5×10-5 K-1时,制动盘峰值温度升高8.4%,最大接触压力增大47%,闸片热膨胀系数的增大加剧接触压力分布不均匀程度而使制动盘温度变化明显;弹性模量增大9倍,接触压力的分布对弹性模量不敏感,弹性模量对盘面温度影响不明显。闸片热传导系数增大7倍,制动盘峰值温度下降4.3%,热传导系数增大,加快热量的扩散速度使制动盘峰值温度降低,该研究结论可为高速列车闸片材料的开发提供参考。     

Synthesis and characterization of a pyrochlore solid solution in the Na2O-Bi2O3-TiO2 system

The compositional limits of a previously reported (J. Am. Ceram. Soc., 61, 5-8. (1978)) but relatively unstudied sodium-bismuth titanate pyrochlore solid solution are revised and their electrical properties presented. The pyrochlore solid solution we report forms via a different mechanism to that originally reported and occurs in a different location within the Na₂O-Bi₂O₃-TiO₂ ternary system. In both cases, relatively large amounts of vacancies are required on the A-sites and on the oxygen sites, similar to that reported for undoped ‘Bi₂Ti₂O₇’ pyrochlore. In contrast to ‘Bi₂Ti₂O₇’, this ternary pyrochlore solid solution can be prepared and ceramics sintered using conventional solid-state methods; however, the processing requires several challenges to be overcome to obtain dense ceramics. This cubic pyrochlore series has low electrical conductivity (and does not exhibit any evidence of oxide-ion conduction) and exhibits relaxor ferroelectric behavior with a broad permittivity maximum of ~100 near room temperature. Variable temperature neutron diffraction data do not provide any conclusive evidence for a phase transition in the pyrochlore solid solution between ~4 and 873 K.